Asus A8N-SLI Premium Marvell Yukon Gigabit Ethernet 7.31.1.3 Specifications:- Supports AMD Socket 939 Athlon 64FX/Athlon 64- AI Cool-Pipe- AI Selector- AMD Cool 'n' Quiet! Technology- NVIDIA NFORCE4 SLI MCP- PCI Express Architecture- SATA 3Gb/s Supports AMD Socket 939 Athlon 64FX/Athlon 64A8N-SLI Premium supports AMD 939-pin Athlon 64 FX/ Athlon 64 processors with 1MB/512KB L2 cache which is based on 64-bit architecture.
BIOS & FIRMWARE. Driver & Tools BIOS & FIRMWARE. Version 1805 202.1 KBytes. A8N-SLI Deluxe BIOS 1805. Fixed Silicon 3114 RAID.
It features 2000/1600 MT/s HyperTransport Bus and dual-channel un-buffered DDR400 memory support. Currently, it also supports AMD Athlon 64 X2 CPU.AI Cool-PipeIt's no longer either quiet operation or low system temperature. The A8N-SLI Premium, with AI Cool Pipe, lets you have the best of both worlds. This unique heat pipe design provides heat dissipation performance comparable to that of cooling fans without the annoying rotation noise.AI SelectorAI Selector enables easy switching between single-GPU and dual-GPU modes by simply clicking on the mouse under Windows operating system. It begins the era of electronic SLI switch, allowing users to enjoy both SLI and non-SLI applications with ease.AMD Cool 'n' Quiet! TechnologySupports AMD Cool 'n' Quiet!
Technology, which monitors system operation and automatically adjusts CPU voltage and frequency for a cool and quiet environment.nVIDIA NFORCE4 SLI MCPSLI technology revolutionizes PC performance by combining multiple PCI Express GPUs in a single and scalable system! Gamers and hardcore enthusiasts know that dual GPUs mean increased, supercharged 3D graphics and performance.PCI Express ArchitecturePCI Express is the latest I/O interconnect technology that will replace the existing PCI. With a bus bandwidth 4 times higher than that of AGP 8X interface, PCI Express x16 bus performs much better in applications such as 3D gaming. The PCI Express x1 interface creates new usages on desktop PCs e.g., TV tuner, 1394b, and high-speed RAID systems.SATA 3Gb/sA8N-SLI Premium supports next-generation SATA hard drives based on the new SATA 3Gb/s storage specification. Furthermore, the chipset has two dedicated SATA controllers delivering more scalable performance and doubles the bus bandwidth for fast hard drive data retrieval and saves.Dual RAIDThe nFORCE4 chipset incorporated four Serial ATA and two parallel connectors with high performance RAID functions in RAID 0, RAID 1, RAID 0 1 and JBOD. The Silicon Image controller provides another four Serial ATA connectors for RAID 0, RAID 1, RAID1 0, and RAID 5 functions. The A8N-SLI Premium is the ideal solution to enhance hard disk performance and data back up protection without the cost of add-on cards.Dual Gigabit LAN & AI NET2The integrated dual Gigabit LAN design allows a PC to serve as a network gateway for managing traffic between two separate networks.
Jul 22, 2010 Again, pure PC. No mac at all and I would be hard pressed to get no answer from them as they are using PC's to get SLI working. Download k-lite media player. The mac pro simply doesn't have the imbedded hardware to make use of this. Windows will only support crossfire with unlocked pc flashed cards.
This capability ensures rapid transfer of data from WAN to LAN without any added arbitration or latency.ASUS AI NET2 remotely detects cable connection the second you turn on the system, and any faulty connections are reported back up to 100 meters at 1 meter accuracy.NV FirewallNV ActiveArmor enhances network security while delivers the highest system performance by offloading CPU-intensive packet filtering tasks in hardware. NV Firewall provides professional-grade traffic inspection capabilities, instanton protection, advanced management features and is easy to use and setup via a user friendly wizard.AI NOSBoost performance when you need it the most!Applications such as 3D games and video editing demand a huge chunk of system resource.Inject 'nitrous oxide' into your CPU! The patented AI NOS (Non-delay Overclocking System) technology intelligently detects system load and automatically boosts performance for the most demanding tasks. Unlike other dynamic overclocking techniques, AI NOS reacts much faster to satisfy your unending need for speeds.AI Audio (8-channel Audio)A8N-SLI has eight channels of audio output with Coaxial and optical S/PDIF connector designed to maximize your auditory experience.
AI Audio also provides 'Jack Sensing' and 'UAJ' functions. 'Jack Sensing' automatically detects and notifies user of any inappropriate connection. 'UAJ' function enables both input and output functions each jacks, thus eliminates the confusion of Line-in, Line-out and Mic jacks once and for all!ASUS Q-Fan2ASUS Q-Fan technology intelligently adjusts both CPU fan and chassis fan speeds according to system loading to ensure quiet, cool and efficient operation.IEEE 1394 interfaceIEEE 1394 interface provides high speed digital interface for audio/video appliances such as digital television, digital video camcorders, storage peripherals & other PC portable devices.Max. 10 USB 2.0 ports supportsUSB 2.0 is the latest connectivity standard for next generation components and peripherals.Backwards compatible with current USB 1.1 peripherals, USB 2.0 delivers transfer speeds up to 40 times faster at 480Mb/s, for easy connectivity and ultra-fast data transfers.Multi-language BIOSThe multi-language BIOS allows you to select the language of your choice from the available options.
Click to expand.I think I see Kevin's point now. I didn't catch on to the fact that your problem is reboots, whereas I think the Marvell driver problem tends to be a system freeze. With the random reboots, do you get any entries in the Event Viewer? If the entries were all for the same device driver, that might suggest a source of the problem. If any failure addresses are random in nature, it could be a processor or a memory problem. A lack of messages implies a hardware source for the problem, but will make it harder to find the source. The fact that your Intel card won't work is another clue.
Could you give us a hardware inventory? Do you have a lot of PCI cards already in the system?
You could use Asus Probe, as a quick check of temps and voltages. A little extra memory voltage wouldn't hurt, like 2.7V instead of the normal 2.5V. Adobe air sdk mac. Get a copy of CPUZ or Everest and see if any operating frequencies or memory timings are out of sorts. If you are using four sticks of memory, you'll need more relaxed memory settings, and the BIOS may not use the most ideal settings for that. In addition to Kevin's suggestion of memtest86+, there is also Prime95 from mersenne.org. That will place a 100% CPU load on the system while in Windows.
You use the 'torture test' option and run mixed FFTs - the calculation has a known result, and Prime can detect when the computer 'does not compute'. If Prime95 runs clean for hours on end, the answer might be quite simple. RMA the motherboard.
In your failure scenario, which is backup of network drives to a USB drive on your computer, not only the network could be a source of the problem, but the USB drive could also be a contributor. You could try copying files from one network drive to another network drive, to eliminate the USB drive as the source of the problem. If the USB drive is bus powered, it would be drawing power from the +5V signal on the USB port.
I think your motherboard runs all the USB ports from +5VSB, and does not offer an option to run USB from the regular (more powerful) +5V output. It could be when the USB drive does a seek, that the extra current is enough to overload +5VSB. In your failure scenario, which is backup of network drives to a USB drive on your computer, not only the network could be a source of the problem, but the USB drive could also be a contributor.
You could try copying files from one network drive to another network drive, to eliminate the USB drive as the source of the problem. If the USB drive is bus powered, it would be drawing power from the +5V signal on the USB port. I think your motherboard runs all the USB ports from +5VSB, and does not offer an option to run USB from the regular (more powerful) +5V output. It could be when the USB drive does a seek, that the extra current is enough to overload +5VSB. My system rebooted itself over the weekend. I assumed it was a network issue since my network backup was not completed.
The crash yesterday was a lockup. However, I did not reboot when I replaced the network driver.
Maybe I should have rebooted instead of just restarted the service. Lack of messages is it!
ATI PCI Express 3001 FireGL video board is the only card. Only two sticks of Ram. I had this problem on an Asus A8V motherboard also. I replaced that motherboard with the A8N SLI due to this issue. The 250 GB USB drive is externally powered. The network problem only occurs after hours of copying files across the network.
Very hard to duplicate. Thanks, Lynn. Click to expand.Smartpower II 450W (+12V2 for processor, +12V1 for motherboard) +5V@30A +3.3@32A +12V1@15A +12V2@17A -12V@0.3A +5VSB@2A Minimum current draw on both +12V outputs is 1 amp. According to a picture of the supply on Newegg. The Antec web page says this minimum current is 0.4A. I don't really see the power supply being a limiting issue.
X2 4800+ is 110 watts, 110/12.(1/0.90) = 10.2A FireGL 3100 is an x300, so I don't think it draws excess power. I did a Google search to review your history. Download videos mac free. I think this is roughly the hell you've been though.
1) Bought A8V Deluxe plus X2 4800+ dual core. 2) Had to buy a 3200+ to flash BIOS to 1013 to make X2 work. 3) Had network problems with the Marvell LAN. Tried an Intel Gigabit card (82540EM based?). Computer would not POST? 4) Switched to A8N-SLI Premium.
5) Tried many Marvell drivers. Still random reboots. 6) Tried Intel card again?
Actually, I have some additional suggestions for the Prime95 test. Since you are running dual core, you should run two copies of Prime95.
Apparently, there is a setting you can apply to each instance of Prime95, called the 'affinity'. I'm not sure where you'll find this, but it could be Task Manager. You want to assign one copy of Prime95 to 'processor 0' and the other copy to 'processor 1'. Affinity references: Bottom post here: I was reading some interesting stuff about overclocking dual core processors the other day. A number of people had commented, that the two cores on the X2 do not overclock equally. In one case, the second core was barely able to meets its spec speed.
A couple of bright lads, used a razor blade to remove the heat spreader on their expensive processors. That allowed their heatsink to be applied right to the silicon die. To their surprise, both cores had equal overclocks, after that modification. The hypothesis there, is that there is some defect in the thermal material between the silicon die and the metal heat spreader on the processor package.
These overclockers suspect there could be a hot spot on one of the cores, caused by bad contact, or a void in the thermal material. I am not suggesting to anyone to get out a razor blade and try this mod. It is much better to RMA a bad processor, then burn your warranty with a mod like this. This is just to illustrate how a badly cooled core can result in cranky processor operation, and the need for a processor RMA. So, that is why I am suggesting running two copies of Prime95 and using the affinity feature to make sure one copy of Prime95 runs per core. You may find, by doing this test, that the processor immediately reboots, in which case you can suspect a dud processor. You could also blame it on the motherboard, but this is, after all, your second motherboard.
As a crosscheck, remove the X2 and put the 3200+ back in the computer for a while. See if a network backup will run without problems that way, and one copy of Prime95 running on the 3200+ is OK. While it won't really prove anything, other than that the motherboard I/O devices are in fact OK, it will help point the finger at that X2 of yours. I still cannot figure out why the PCI Ethernet card doesn't work. What were the symptoms when it was used on the A8V and the A8N?
Paul, funny is that the voltage range is on this A8N-SLI auto and then the first step 2.60 and followed by 0.05V steps. On an other ASUS P4P800-E Delux it starts by 2.55V and followed by 0.1V steps. In other words why on the A8N-SLI is the lowest 2.60V and on an other 2.55V.
On A8N-SLI & ASUS P4P800-E Delux I run now on 2.65V. Also for me it is not clear to wich voltage sets the default AUTO switch. Ausus prope do not tell the real voltage nor cpu-z This allown does not simulate real PC load like: random Hard Disk & CDROM access and other motherboard chip loads. I have/had some random blue screens with C2, D3, 50, 1A but cannot tell whether it was caused by the sound driver.it's reall the hell hp. Click to expand.' This allown does not simulate real PC load like: random Hard Disk & CDROM access and other motherboard chip loads.' That is absolutely true.
The purpose of testing with Prime95, is to cover the processor, memory, and Northbridge memory interface. In the case of the Athlon64, the memory controller is inside the processor, so the test coverage is even smaller, covering just the processor and memory. I suggested this test, to determine if the processor is at fault. It is not possible to test the motherboard ports, generally speaking, without buying some kind of PC test application.
And, in any case, such an application may not do a very thorough test. Ideally, you would want a box full of 'test dongles', devices that can connect to an I/O port and in conjunction with a testing application, give known results. Running 3DMark on the system, would extend test coverage to the video card, and do a bit more of that random access you are looking for. But first, I'd like to know if the processor is healthy, before extending the amount of hardware that the test is covering. I prefer free test applications, as most people can afford them.
You can also get a measure of your computer's health, by booting up a read-only Linux distro like Knoppix. That will tell you whether the PCI bus interface on your I/O chips is working or not, as you'll get all sorts of crazy error messages if the PCI bus is busted. I like to use Knoppix while attempting to overclock. There are probably other, smaller, distros that are suitable for doing the same thing. Click to expand.I did not try the Intel NIC on the A8V.
I have had problems with VIA chipsets before so I suspected it. The Intel NIC in PCI slot #2 would not allow the A8N to post. The Intel NIC in PCI slot #1 would post and boot WinXP SP2 but it would only work in 10 mbit mode. I did not disable the Marvell dual LAN in the BIOS setup though. I just noticed yesterday that you can do that.
So I will probably disable the Marvell dual LAN and try the Intel NIC again in a day or two. THanks, Lynn. Really makes one want to go back to Intel cpus. I did not try the Intel NIC on the A8V. I have had problems with VIA chipsets before so I suspected it. The Intel NIC in PCI slot #2 would not allow the A8N to post.
The Intel NIC in PCI slot #1 would post and boot WinXP SP2 but it would only work in 10 mbit mode. I did not disable the Marvell dual LAN in the BIOS setup though. I just noticed yesterday that you can do that. So I will probably disable the Marvell dual LAN and try the Intel NIC again in a day or two.
THanks, Lynn.
3.2GHz DP Mac Pro (Early 2008), Mac OS X (10.5.1), Nvidia 8800 GT Unix download for mac.
Posted on